How GURTEC rollers help reduce conveyor operating costs
A conveyor’s total cost of ownership starts with the cost of each operating hour, rather than the equipment’s purchase price.
Rollers are rarely seen as a factor in energy consumption. Yet when a system contains thousands of them, even a small difference in rotational resistance translates into significant electricity costs.
A high-quality GURTEC roller with deep groove ball bearings and an effective sealing system can have a rotational resistance of 2–6 N. For lower-quality rollers, this figure can reach 20 N.
.jpg)
The economics are straightforward:
At a belt speed of 5 m/s and 5,000 operating hours per year, every additional 1 N of resistance means approximately 25 kWh of extra electricity consumption per roller annually.
For a single roller, that may seem modest.
For a thousand rollers, it adds up to 25,000 kWh per year for every additional newton of resistance.
A lower roller purchase price therefore does not necessarily mean lower costs. Initial savings can quickly be offset by higher electricity costs during operation.
Roller diameter also affects energy efficiency.
A Ø133 mm roller costs more than a Ø108 mm roller, but the larger diameter reduces belt deformation at the contact point and can reduce indentation rolling resistance losses by more than 20%.
Energy savings therefore come from two sources:
- Lower rotational resistance means less energy is needed to rotate the rollers.
- A larger diameter means less energy is lost through belt deformation.
This is why a roller should be assessed on more than the price quoted in a supplier’s offer.
The more important question is: how much will it cost to operate over its entire service life?
This is the principle behind total cost of ownership (TCO): considering both the amount paid for a component today and the costs it will generate over years of operation.
This is where the technical features of GURTEC rollers deliver economic value.
Precision manufacturing, deep groove ball bearings and a multistage labyrinth sealing system ensure smooth rotation, protect the bearing assembly against dust and moisture, and help reduce maintenance requirements.
Low rotational resistance and a correctly selected roller diameter directly affect energy losses in the conveyor system.
When thousands of these rollers are used, the benefits of each component extend across the entire conveyor: lower energy losses, longer service life, less maintenance and lower operating costs.
Choosing GURTEC rollers therefore goes beyond the price or quality of an individual component. It is a decision that affects the total cost of ownership of the entire conveyor system.
.jpg)
Comments